Product Details:
Payment & Shipping Terms:
|
Product Name: | High Quality Ceiling Explosion Proof Fluorescent Light 90cm 6500k Hazardous Areas IP66 2x18W | Material: | Aluminum + Thickened Glass |
---|---|---|---|
Color Temperature(CCT): | 5700k | Lamp Luminous Efficiency: | 115 Lm/w |
CRI (Ra>): | 70 | Application Area: | Zone 1, 2, 21,22 |
Working Temperature: | -20℃-45℃ | IP: | IP65 |
Length:: | 2ft / 4ft | Voltage: | 220 Vac / 24 Vdc / 36 Vdc |
High Light: | Ceiling Explosion Proof Fluorescent Lights,90cm Explosion Proof Fluorescent Lights,IP66 hazardous area light fittings |
High quality Ceiling Explosion Proof Fluorescent Light 90cm 6500k Hazardous Areas IP66 2x18W
Application
BPY explosion-proof LED explosion-proof lamp is suitable for fixed lighting places such as mine tunnels and chambers where methane or coal dust explosion is dangerous.
There are also tunnels, pharmaceutical factories, chemical plants and other zones 1 and 2, zone 21 and 22 are flammable and explosive dangerous places
Product Feature
1. Explosion-proof design (explosion-proof net added), wide input voltage range.
2. The transparent explosion-proof toughened glass tube and the protective net cover are used as the lamp tube, which has high light transmittance and meets the requirements of impact strength.
3. The professionally designed LED light source heat dissipation structure is built in the lighting category, which has good thermal conductivity and meets the requirements of explosion-proof structure. At the same time there are T5/T8 fluorescent tube options.
4. Large number of led light sources, matrix layout, uniform light output and wide light output range.
5. Emergency induction system, emergency ballast, etc. can be added. In the micro power mode, the radar microwave control board emits radar microwave signals intermittently. When a person or vehicle enters the coverage of the radar microwave sensor light, the radar microwave sensor control board immediately receives the feedback microwave signal. The light enters the full power mode; after the person or vehicle leaves the microwave radiation range, the full power light automatically delays for 30s and then enters the micro power lighting mode.
Specification:
Ex Marking | Ex d IICT4Gb | ||
Classification | Group II, Catogory 2 GD; Class I, Division 1 and 2,Group A,B,C,D; Zone 1, 2 & Zone 21, 22 | ||
IP Degree | IP65 | ||
Corrosion Resistant | WF1 / WF2 | ||
Input Voltage | 220VAC, 50HZ | ||
Conduit Entries | G 3/4” | ||
Battery Back-up | Optional, Emergency time>90min;Charging time:24h; | ||
Mounting Styles | Pendant; Ceiling; Chain; Embedded; Wall; |
Application:
1. It is applicable to the places in Zone 1 and Zone 2 of explosive gas environment;
2. It is applicable to the places in Zone 21 and 22 of combustible dust environment;
3. Suitable for IIA, IIB and IIC explosive gas environment;
4. Applicable to T1~T6 temperature groups;
5. It is applicable to energy-saving transformation projects and places where maintenance and replacement are difficult;
6. It is widely used for lighting in oil exploitation, oil refining, chemical industry, gas station, textile, food processing, offshore oil platforms, oil tankers and other places.
7. Typical applications include:
Oil and gas industries
Chemical, petrochemical
Pharmaceutical industries
Pulp and Paper
Waste and sewage treatment
Company introduction:
Changzhou JUJUN Ex-proof company is a comprehensive enterprise integrating R&D, production, sales and service.
We mainly produce and operate maintenance-free LED explosion-proof lamps, explosion-proof lamps, explosion-proof electrical appliances, explosion-proof accessories, low-voltage electrical components, molds, power distribution switch control equipment and other products.
It is located in the Yangtze River Delta region, on the verge of Shanghai, with convenient transportation, welcome customers to visit our factory.
FAQ:
Q1. Can I have a sample order for explosion proof led light ?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time of explosion proof led light?
A:Sample needs 5-7 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for explosion proof led light?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 7-10 days to arrive. Airline and sea shipping also optional.
Q5: Do you offer guarantee for explosion proof led light?
A: Yes, we offer 3-5 years warranty to our products.
Q6: is OEM or ODM available for explosion proof led light?
A: Yes
Q7: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.
Products details:
Contact information:
Emma
Wechat: 15995033689
whatsapp: +86 15995033689
Contact Person: Mrs. Emma Zhou
Tel: 86-15995033689