T8 Flame Proof Led Tube Light Dimmable 36 Inch 6 Inch 12 Inch 18 Inch 6000K

Advantage:

1. The all-plastic explosion-proof LED fluorescent lamp shell is made of glass fiber reinforced polyester, and the transparent part is made of UV-resistant polycarbonate.
2. They have good protection against various chemical substances in petroleum, chemical, fuel and other factories.
3. High stability interlock operation. When the isolating switch is interrupted, the cover can be opened, and at the same time all internal power supplies will be cut off, blocking the risk of explosion.
4. It is internally equipped with high heat dissipation explosion-proof power supply module and explosion-proof inverter module, with constant current output function and over-temperature protection function.
5. The LED light source module uses the latest LED high-efficiency particles, with excellent luminous intensity and color rendering.
6. Used for 110~250V AC, 50/60Hz circuit lighting. Suitable for explosive gas and dust environment as general lighting or emergency lighting.
Installation method: ceiling type, chain type, pendant type, wall type and clip type. Platform fence type, platform flange type, wall type
The protection level reaches IP66.
With an interlocking device, the transparent part and the shell cannot be energized until they are completely closed to ensure safe use.
The emergency type has fault signal, charging signal, and discharging signal indication.

International IECEx certification, EU ATEX certification.

technical parameter:
Rated voltage: AC220V50/60HZ, rated power: 9Wx1, 9Wx2 (type l) 18Wx1x 18Wx2 (type ll)

Explosion-proof mark: ExdembllCT6Gb/ExtDA21 IP66T80°C, protection level: IP66, corrosion protection level: WF2

Optional function: human body induction.
Lead-in device: M25X1.5 lead-in specification, suitable for 9mm~12mm cables, terminal block: W4mm, reliable wire connection

Installation method: Ceiling type (X), wall type (b), boom type 1 (g1), boom type 2 (g2), guardrail type (h), flange type (f), hanging chain type (L ), curved rod type (w)

 
Specification: 

The BYS-2X18W Explosion Proof Fluorescent Fixture from Crown Extra is ATEX/IECEx approved for Zones 1 and 2 and 21 and 22. This 18-watt unit is equipped with two, 4-foot T8/T6 LED tube lamps that operate on 220-240V AC.(can choose LED tube) The IP66-rated fixture is made out of non-sparking materials that are highly resistant to rough impacts (IK10). This fluorescent lamp can be mounted on ceilings or walls using a pair of stainless steel mounting brackets.

Operation precautions:
1. Don't switch explosion-proof and anti-corrosion fluorescent lamps too frequently;

2. If the voltage is very low, the two stages of the lamp will emit tungsten at the beginning of lighting, which will cause a lot of dot-shaped pollutants inside the lamp, which will become one of the reasons for the damage of the lamp. Therefore, it is recommended to Turn on the lights under high voltage conditions;

3. Explosion-proof and anti-corrosion fluorescent lamps have many lines and need auxiliary devices, so they must be used in conjunction with corresponding transformers, capacitors, etc. to ensure that the lamp is started to a suitable power;

4. Pay attention to maintain a ventilated environment, not only to take away the dust, but also to reduce the temperature of the lamp, so as to extend the life of the lamp.

Company introduction:
 
Changzhou JUJUN Ex-proof company is a comprehensive enterprise integrating R&D, production, sales and service.
We mainly produce and operate maintenance-free LED explosion-proof lamps, explosion-proof lamps, explosion-proof electrical appliances, explosion-proof accessories, low-voltage electrical components, molds, power distribution switch control equipment and other products.
It is located in the Yangtze River Delta region, on the verge of Shanghai, with convenient transportation, welcome customers to visit our factory.
 
 FAQ:
1. who are we?
We are based in Jiangsu, China, start from 2016,sell to North America(20.00%),Central America(15.00%),Eastern Asia(12.00%),South Asia(10.00%),Mid East(10.00%),Southeast Asia(10.00%),Domestic Market(4.00%),Africa(4.00%),South America(2.00%),Northern Europe(2.00%),Eastern Europe(1.00%),Oceania(1.00%),Southern Europe(1.00%),Western Europe(1.00%). There are total about 101-200 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Spray booth,prep station,car washing machine,car lift,powder coating line

4. why should you buy from us not from other suppliers?
Yancheng Biaosin Import&Export Co.,Ltd is in yancheng city,in charge of the export and import of jiangsu jing-zhongjing industry coating equipment. We're enterprise specializing in manufacture and sales of industrial painting equipment,and relaited machine
 
 
Products details:
 

Contact information:
 
Emma
Wechat:  15995033689
whatsapp: +86 15995033689