| Type: |
BFAG (BAG) |
| Ex rate: |
Ex d IIB T4 Gb; |
| Degree of protection |
IP54 / IP65 |
| Rated voltage |
110 VAC |
| Size of blade |
300; 400; |
| Power consumption |
120; 180; |
| Air volume (m³/min) |
2200; 2400; |
Applications:
1. A wide range of hazardous areas where ignitable vapors, dust, moisture and corrosive elements are present
2. Areas requiring frequent on-and-off of lights or power cycling- no warm up time required
3. Areas with high energy costs
4. Typical applications include: Oil and gas industries
Chemical, petrochemical
Pharmaceutical industries
Pulp and Paper
Waste and sewage treatment
Power Generation
5. Suitable for zone 1 and zone 2 of explosive gas atmosphere;
6. Applicable to ⅡA, ⅡB, ⅡC explosive gas atmosphere;
7. Suitable for zone 21 and zone 22 in combustible dust environment;
Installation Notes:
First, check whether the frame and phoenix leaf are deformed, whether the fan leaf rotates flexibly, and
whether there is friction. Check that all fasteners are complete and tight.
The line voltage must match the rated voltage on the motor nameplate.
Check the insulation resistance of the motor with a soov megohmmeter. If the resistance value is less than
10MO, use the drying method or the short-circuit current method.
A small explosion-proof switch must be used as a power switch, or an ordinary switch must be installed in
an outdoor non-explosive hazard.
The outer diameter of the cable connected to the power supply should be consistent with the sealing ring.
After tightening and pressing the nut, it should be ensured that the sealing ring is connected to the cable, and
the sealing ring is connected to the outlet nozzle.
No gap, otherwise the flameproof performance will be lost.
The non-wiring part of the explosion-proof motor cannot be disassembled at will. When wiring, open the
cover of the wiring room, and connect the lead wire to the terminal. After connecting, cover the cover and
tighten the screws so that the gap between the explosion-proof surface is less than 0.2mm, and then tighten
the outgoing wire. device so that the leads cannot move.
Product Details:
FAQ:
Q: What certificates do you have for explosion proof exhaust fans?
A:We have passed ATEX.
Q: What place are your products used in?
A:They are widely used in petroleum chemical, aerospace, coal electrical power, railway, metallurgy, shipbuilding, medicine, marine, wine-making, fire fighting, municipal and other industries.
Q: Can I have a sample order for explosion proof exhaust fans?
A:Yes, we welcome sample orders to test and check quality. Mixed samples are acceptable.
Q: Can you accept OEM or ODM for explosion proof exhaust fans?
A:Yes. Please inform us and confirm the design firstly based on our sample.
Q. Do you have any MOQ limit for explosion proof led light?
A: Low MOQ, 1pc for sample checking is available
Q. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 7-10 days to arrive. Airline and sea shipping also optional.
Q: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.
Company information:
Changzhou JUJUN Ex-proof company is a comprehensive enterprise integrating R&D, production, sales and service.
We mainly produce and operate maintenance-free LED explosion-proof lamps, explosion-proof lamps, explosion-proof electrical appliances, explosion-proof accessories, low-voltage electrical components, molds, power distribution switch control equipment and other products.
It is located in the Yangtze River Delta region, on the verge of Shanghai, with convenient transportation, welcome customers to visit our factory
Your message must be between 20-3,000 characters!
