2x36w Explosion Proof Fluorescent Light Fiber Glass Reinforced Polyester
Applications:
1. A wide range of hazardous areas where ignitable vapors, dust, moisture and corrosive elements are present
2. Areas requiring frequent on-and-off of lights or power cycling- no warm up time required
3. Areas with high energy costs
4. Typical applications include:
Oil and gas industries
Chemical, petrochemical
Pharmaceutical industries
Pulp and Paper
Waste and sewage treatment
Power Generation
Features:
1. GRP enclosure, corrosion-proof, Polycarbonate lampshade, strip-shaped with anti-glare
2. Special locking mechanism, with reliable locking force
3. Lightweight and slim line construction
4. The emergency device can be equipped at the request of users.
5.Automatic power off when the shell opens
Standard Materials
Housing: Fiber-glass reinforced polyester
Exterior: Stainless steel
Diffuser: Polycarbonate, anti-glare
Gasket: Silicon rubber
Certifications:
ATEX
CNEX
CE
RoHS
ISO9001
Specification:
| Ex Marking |
Ex d e IIC T4 Gb; Ex tD A21 IP66 T80℃ |
| Classification |
Group II, Catogory 2 GD; Class I, Division 1 and 2,Zone 1, 2 & Zone 21, 22 |
| IP Degree |
IP66 |
| Corrosion Resistant |
WF1 |
| Input Voltage |
110-220VAC, 50/60HZ |
| Conduit Entries |
G 3/4” |
| Battery Back-up |
Optional, Emergency time>90min;Charging time:24h;Starting time:0.3s |
| Mounting Styles |
Pendant; Ceiling; Chain; Embedded; Wall; Stanchion |
Ordering Information
| Model No. |
BYS600 |
BYS1200 |
| T8 Fluorescent Tube |
(1~3)*18W(1350Lm, 75lm/W) |
(1~3)*36W(2700Lm, 75lm/W) |
| T5 Fluorescent Tube |
(1~3)*14W(1350Lm, 96lm/W) |
(1~3)*28W(2100Lm, 75lm/W) |
| LED Tube |
(1~3)*8W(800Lm, 100lm/W) |
(1~3)*18W(1800Lm, 100lm/W) |
The BYS-2X18W Explosion Proof Fluorescent Fixture from Crown Extra is ATEX/IECEx approved for Zones 1 and 2 and 21 and 22. This 18-watt unit is equipped with two, 4-foot T8/T6 LED tube lamps that operate on 220-240V AC.(can choose LED tube) The IP66-rated fixture is made out of non-sparking materials that are highly resistant to rough impacts (IK10). This fluorescent lamp can be mounted on ceilings or walls using a pair of stainless steel mounting brackets.
Operation precautions:
1. Don't switch explosion-proof and anti-corrosion fluorescent lamps too frequently;
2. If the voltage is very low, the two stages of the lamp will emit tungsten at the beginning of lighting, which will cause a lot of dot-shaped pollutants inside the lamp, which will become one of the reasons for the damage of the lamp. Therefore, it is recommended to Turn on the lights under high voltage conditions;
3. Explosion-proof and anti-corrosion fluorescent lamps have many lines and need auxiliary devices, so they must be used in conjunction with corresponding transformers, capacitors, etc. to ensure that the lamp is started to a suitable power;
4. Pay attention to maintain a ventilated environment, not only to take away the dust, but also to reduce the temperature of the lamp, so as to extend the life of the lamp.
Company introduction:
Changzhou JUJUN Ex-proof company is a comprehensive enterprise integrating R&D, production, sales and service.
We mainly produce and operate maintenance-free LED explosion-proof lamps, explosion-proof lamps, explosion-proof electrical appliances, explosion-proof accessories, low-voltage electrical components, molds, power distribution switch control equipment and other products.
It is located in the Yangtze River Delta region, on the verge of Shanghai, with convenient transportation, welcome customers to visit our factory.
FAQ:
1. who are we?
We are based in Jiangsu, China, start from 2016,sell to North America(20.00%),Central America(15.00%),Eastern Asia(12.00%),South Asia(10.00%),Mid East(10.00%),Southeast Asia(10.00%),Domestic Market(4.00%),Africa(4.00%),South America(2.00%),Northern Europe(2.00%),Eastern Europe(1.00%),Oceania(1.00%),Southern Europe(1.00%),Western Europe(1.00%). There are total about 101-200 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Spray booth,prep station,car washing machine,car lift,powder coating line
4. why should you buy from us not from other suppliers?
Yancheng Biaosin Import&Export Co.,Ltd is in yancheng city,in charge of the export and import of jiangsu jing-zhongjing industry coating equipment. We're enterprise specializing in manufacture and sales of industrial painting equipment,and relaited machine
Products details:
Contact information:
Emma
Wechat: 15995033689
whatsapp: +86 15995033689
Your message must be between 20-3,000 characters!
